Snorkel Scissor Lifts
Rough Terrain SR4084
SR2584 Standard Features
- Level sensor
- 4" roll-out extension
- Printed circuit board with on-board LED diagnostics
- Joystick control on removeable console
- Fully proportional controls
- Hydraulic warm up kit
- Manual bleed down
- Articulating rear axle
- 4-wheel drive system
- 2-wheel parking brakes
- Driveable at full height
- Drive motion alarm
- Side trays
- Foam filled tires
- High engine temp and low oil pressure shut down
- Hour meter
- 125 volt GFCI AC outlet at platform
|
SR4084 - Rough Terrain Scissors
Platform |
| Height |
39'10" (12.1m) |
| Size |
6' x 10' (1.8 x 3.0 m) |
| Guardrail height |
43-1/2" (110 cm) |
| Rollout extension |
4' (1.3 m) |
| Capacity |
750 lbs (340 kg) |
| Rollout Capacity |
350 lbs (158 kg) |
| Stowed platform height |
8'10-1/4" (2.7 m) |
| Toeboard height |
6" (15 cm) |
 |
|
Machine Dimensions |
| Overall Stowed Height |
8'10-1/4" (2.7 m) |
| Overall Width |
7' (2.1 m) |
| Overall Length |
12'6-1/2" (3.8 m) |
| Wheel Base |
7'5-1/2" (2.3 m) |
| Ground Clearance |
6-3/4" (17.1 cm) |
| Tire Size / Type |
26 x 12 (foam filled) |
|
|
|
Performance |
| Weight |
9,300 lbs (4218 kg) |
| Power Source |
gasoline or diesel |
| Gradeability |
32% |
| Drive Speed Elevated |
0.4 mph (0.6 kph) |
| Drive Speed Stowed |
2.4 mph (3.9 kph) |
| Platform lift speed |
35 sec minimum |
| Turning Radius Outside |
8'10" (2.7 m) |
| Turning Radius Inside |
16'7" (5.1 m) |
Snorkel Scissor Lifts
 |
